All - Test Pro ^TM 31 New

 
NEW!
The hand-held ALL-TEST PRO™ 31 incorporates tests for faults to ground, internal faults such as turn-to-turn and coil-to-coil and phase balance. Electric interference from residual or stray currents from test-object or surrounding power sources is measured by an included EMI test.

Testing frequencies are selected from a range of 25 – 800 HZ, which enables the instrument to test fractional as well as large AC/DC motors, generators and transformers, multi or single phase.

In addition, the instrument features a revolutionary, patented rotor test, which quickly finds broken rotor bars and casting voids.

The instrument is hand-held and weighs only 1 lb. It provides safe, off-line testing on de-energized machinery and will save the user downtime, unnecessary repairs and on utility bills. It will take the guess-work out of motor trouble shooting and management.

All - Test IV Pro 2000^TM 

Making and comparing 5 different measurements across 3 phases enables you to pinpoint winding and rotor faults in motors of all sizes. Handles not only 3-phase induction, but also DC motors and even traction motors and machine tool servos. The All-TEST IV PRO 2000™ performs automated measurements, performs calculations and comparisons, and gives immediate readings in engineering units. The ALL-TEST IV PRO 2000™ has on board memory to store data and previous results from 500+ motors and a PC interface. Includes case, charger, test leads, PC interface cable, and Trend 2003 software for analysis and reporting.

All - Test Pro^TM Ol Kit (on-line)

  
On-Line Motor Diagnostics in a Hand-Held Instrument.
The first Motor Current Signature Analysis (MCSA) and Power Quality Analysis system to utilize a hand held, light-weight, data collector. It is not necessary to carry a PC to the test site.

The system evaluates the electrical and mechanical health of an AC or DC motor and its driven load, as well as incoming power quality showing complete ac/dc power/energy cost analysis.

The unit does not require entering nameplate data before data collecting. This can be done after the testing and before the analyzing. Running Speed and Pole Pass Frequency are found automatically and the software automatically determines if bearing problems exist and the presence of static and dynamic eccentricity.
  

The All - Test Pro^TM Advanced Analysis Kit

For the maximum capability in motor diagnostics, select the Advanced Analysis Kit. It combines the basic troubleshooting and real-time rotor test of the ALL-TEST 31, the analytical and trending power of the ALL-TEST IV PRO 2000™, and the diagnostics of the EMCAT software. Used together, these tools can electrically isolate the rotor and windings in assembled motors for highly accurate fault pinpointing including: winding shorts, open conductors and coils, reversed coils, connection defects, air gap defects, and rotor defects (broken bars, eccentricity, and casting voids). Each ALL-TEST Advanced Analysis Kit Includes: ALL-TEST IV PRO 2000™ analyzer, ALL-TEST PRO™ 31, manuals and guidebooks, leads, chargers, cases, Trend 2000 software, EMCAT software, the Motor Circuit Analysis reference book, an ATF 11 and an M2000 training motor.

The All - Test Pro^TM MD Kit

The ALL-TEST PRO™ MD Kit gives you total Predictive Maintenance, Trouble Shooting and Power Quality Control in one economical, small and light-weight package!
It includes the ALL-TEST IV PRO 2000™ complete kit with the EMCAT software, the ALL-TEST PRO™ 31 complete kit, the ALL-TEST PRO™ OL (On-Line) complete kit, the ATF11 DC clamp, the M2000 training motor and the AT12000 Motor Circuit Analyzer Book by Dr. Howard Penrose.

EMCAT® Motor Management Software

EMCAT® Comprehensive Motor Management Software
EMCAT Software is a total motor and transformer maintenance package, which integrates with the ALL-TEST IV Pro 2000, a handheld fault finder and data collector.
Combined they offer a package that performs testing and automatic analysis of AC/DC electric motors, including rotors, and transformers.

The software incorporates trending, routing, scheduling of maintenance, work order management, review of equipment data by location or name and entering of data from other test technologies.

It can be configured to interface with commercial CMMS packages and the US Department of Energy software program MotorMaster Plus.

Diagnostic Software

Condition Calculator 3.0 (CC3) has been developed to provide a simple method for testing and reporting your findings using your ALL-TEST PRO™ 31 motor tester. The software allows for quick analysis of impedance, I/F, phase angle, phase balance and insulation to ground testing, it also allows for viewing of EMI (Electro-Magnetic Induction) test results, rotor test results and rotor compensation testing. As an improvement from the Condition Calculator 2.0, a graphic report may be printed. 

ATI2000 Motor Circuit Analysis Reference Book 

Motor Circuit Analysis: Theory, Application and Energy Analysis by Dr. Howard W. Penrose, Ph.D. is an essential tool for the motor circuit analyst.It includes extensive analysis and troubleshooting sections, plus information on using the ALL-TEST PRO™ instruments, software tools, and the US D.O.E. Motormaster + as part of an energy and reliability based predictive maintenance program. 

ATF 11 Armatures Fixture

This fixture is used with either the ALL-TEST PRO™ or ALL-TEST IV PRO 2000™. It enables easy bar-to-bar testing of DC motor armatures. 

ATM 2000 Training Motor

For training personnel in fault detection, we offer the M2000, a 1/3 HP 3-phase motor with known selectable faults. See the effect of turn faults, ground faults, and shorted windings.